Altair Glide Computer and Navigation System Owner's Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 38
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
2 SYSTEM FUNCTIONS
2.3 Brightness adjustment
The brightness of the LCD screen is adjustable via a backlight, and can be software controlled from
the menu system in XCSoar from the menu:
DISP . Brightness Adjust
This allows the automatic backlight to be enabled or disabled, as well as manual adjustment and
bias of the automatic backlight. When automatic backlight is enabled, the brightness field adjusts
the automatic backlight system; otherwise the brightness field adjusts the backlight directly.
The purpose of the adjustment in automatic backlight mode is to help the system adapt to the pilot’s
preferences.
that the LCD backlight which is controlled by the brightness adjustment, has a significant
effect on power consumption. It is recommended that if needing to conserve battery, to turn
brightness up to the lowest level at which it is comfortable.
For Altair Pro systems, the maximum brightness is limited when using backup battery in order to
extend the duration that Altair can operate.
2.4 Data link
Three data links are available in Altair. Two external serial ports are located at the main connector.
The primary serial port (COM1) is used to connect to an external GPS source, intelligent variome-
ter, or FLARM. The secondary serial port (COM2) can be connected to a slave Altair device or an
alternative GPS or VARIO device. A third serial port (COM3) is reserved for the Altair flight recorder
unit.
Recommended serial settings in XCSoar for Altair Pro and Vega installations are to use the Altair
flight recorder unit as the primary GPS source, and Vega/FLARM as the secondary source:
Device A Device Altair RU
Device A Port COM3
Device A Speed 57600
Device B Device Vega
Device B Port COM1
Device B Speed 38400
Recommended serial settings in XCSoar for Altair Standard and Vega installations are to use Veg-
a/FLARM as the primary data source:
Altair Owner’s Manual ALTAIR-EN 8
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

Comments to this Manuals

No comments